AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) MSRP: Was: Now: $162.92 - $206.95 Choose Options
ECMTuning Speed Density Bundle - GM MAP, IAT, Pigtails & Bung (DSM) MSRP: Was: Now: $115.00 Choose Options
ECMTuning Manifold Differential Pressure / MDP Sensor (DSM 2G) This adapter bolts into place of the factory MDP sensor on top of the stock 2G intake manifold. You can either screw in the included 1/4" x 1/8" NPT hose barb fitting and run a short vacuum hose to your boost sensor or directly connect an AEM boost... MSRP: Was: Now: $20.00 Add to Cart
Haltech Wideband Sensor - Bosch LSU 4.9 Wideband Sensor only - Bosch LSU 4.9 with Factory Connector HT-010718 MSRP: Was: Now: $130.00 Add to Cart
AEM Bosch UEGO Replacement 02 Sensors (Universal) AEM Bosch Wideband/O2 Replacement Sensor.Old Design # 30-2001 New Design #30-2004 Prop 65: for California residents only(1) Do Not cover, obscure or alter a Prop 65 warning label that AEM Electronics intends to affix to its products, labels, or... MSRP: Was: Now: $112.00 - $143.00 Choose Options
ECMTuning - Speed Density Ethanol Sensor Adapter (DSM/Evo) This harness adapter has a connector for a standard GM-style ethanol sensor on one end and loose terminals on the other end that plug into our SD cable's MAF connector. Specify whether you have a 1G DSM, 2G DSM or EVO1-3 MAF connector end on your SD... MSRP: Was: Now: $40.00 Choose Options
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous... MSRP: Was: Now: $162.92 - $206.95 Choose Options
Omni 4 Bar MAP Sensor (Mitsubishi) The unique ability to compensate for temperature changes allows the Omni Power USA MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale. Pressure changes are calculated on a true linear 0-5 volt... MSRP: Was: Now: $139.99 Add to Cart
ECMTuning Speed Density Bundle - GM MAP, IAT, Pigtails & Bung (DSM) The complete set up for running speed density with ECMLink. A reliable 4-bar MAP sensor and a GM IAT sensor complete with pigtails and bung.If you're looking for true "plug-n-play" then be sure to check out ECMLink's direct-connect SD cable. This SD... MSRP: Was: Now: $115.00 Choose Options
ECMTuning - 1G-to-2G CAM Angle Sensor ECMTuning's 1G-in-a-2G CAM angle sensor adapter harness allows for the installation of a 1G style Cam Angle Sensor into a 2g car without a fuss! One end plugs directly into the 1G CAM/Crank combination sensor and the other end plugs directly into the... MSRP: Was: Now: $75.00 Choose Options
KDN Performance Shift Cut Knob (DSM/Evo) A "shift-cut" momentarily interrupts the torque output of the engine, allowing the driver to rapidly change gear while maintaining wide-open throttle Designed for Power-Shifting at Wide open throttle - by applying force to the knob it will click the... MSRP: Was: Now: $350.00 - $375.00 Choose Options
Haltech Oil Temperature Sensor High Range Thread: 1/8 NPT 27TPI Haltech Oil Temperature sensor High Range 150°C #HT-010306 MSRP: Was: Now: $85.00 Add to Cart
Haltech Wideband O2 Sensor - Bosch LSU 4.2 (DSM/Evo) Haltech Wideband O2 Sensor Only - Bosch LSU 4.2#HT-010714INCLUDES: Pre-terminated with female Deutsch DT-6 connector. MSRP: Was: Now: $150.00 Add to Cart
Haltech 5 Bar "TI' MAP Sensor Haltech 5 Bar "TI" MAP Sensor Thread: 1/8 NPT HT-010110 Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electronically tested before... MSRP: Was: Now: $239.00 Add to Cart
Bosch 145 PSI Fluid Pressure & Temperature Sensor Bosch 145 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measure fluid pressure and temperature Pressure Range 0-145 PSI Temperature Range -40... MSRP: Was: Now: $155.00 Add to Cart
Haltech 150psi "TI' Fuel / Oil / Wastegate Pressure Sensor 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted... MSRP: Was: Now: $199.00 Add to Cart
AEM Replacement Brass Sensor Kits Brass Gauge style (PSIg) Pressure SensorsAEM offers brass PSIg sensors in 100 and 150. Gauge style pressure sensors reference pressure above atmospheric pressure. When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig. Gauge... MSRP: Was: Now: $65.65 - $88.15 Choose Options
Haltech WB1 Single Channel CAN O2 Wideband Controller Kit Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs... MSRP: Was: Now: $349.00 Add to Cart
AEM Inlet Air Temperature Sensor Kit for EMS - 3/8" (Universal) AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors,... MSRP: Was: Now: $74.35 Add to Cart
