Turbo Kits & Hot Parts

PTP Turbo Blanket (T3/T4)

PTP Turbo Blankets isolate the heat produced by your turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.In keeping the heat of the exhaust...

STM -4AN Stainless Braided Turbo Oil Feed Line (Universal)

Vehicle Fitment:Universal Application Description:The STM -4AN Stainless Braided Turbo Oil Feed Lines are available in 4 lengths (28", 24", 18" or 14") and feature one straight end and one 90° end with swivel fittings for an easy install. USA...

JMF V-Band Cast Merge Collector (DSM/Evo)

If you're a DIY manifold builder this collector is a must have!  This is JMF's investment cast turbo merge collector for the PTE and TIAL V-band turbos.  Made from 304 stainless steel, designed to work with 1.5" schedule 10 or 40 nominal pipe...

Exhaust Manifold - Forced Performance Race Exhaust Manifold (DSM)

Forced Performance's FP Race Manifold is made in D5S Ni-Resist Turbine housing material, not inferior generic cast iron. This manifold is a direct replacement for 90-99 DSM Eclipse, Talon and Laser applications. This does not require any modifications to...

Vibrant Tight Radius Cast Aluminum Elbows

Flange - For Evo 8/9 76MM Downpipe

This flange is made to mate up to FP's EVO IX cast O2 housing and is used to make a true three inch downpipe.

PTP Turbo Blanket (Large T4 )

PTP Turbo Blankets isolate the heat produced by your turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.In keeping the heat of the exhaust...

PTP Turbo Blanket (T3)

PTP Turbo Blankets isolate the heat produced by your turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower.In keeping the heat of the exhaust...

JMF T3 Turbine Inlet Flange for Cast Collector (DSM/EVO)

Use this flange to adapt the JMF V-band cast merge collector to a T3 turbo merge collector, made from 1/2" 304SS.  Holes are threaded for M10x1.25.  Requires you to weld a small extension tube on the wastegate port BEFORE welding the collector...